![background image](http://html1.mh-extra.com/html/kramer/vp-88k/vp-88k_user-manual_2001277031.webp)
Controlling the VP-88K
27
27
5. Set the Machine number on all
VP-88K
units other than Machine 2 to a
unique number between 3 and 16 (see
Section 6.5
)
1
.
Figure 22
shows the DIP-
switch setting for Machine 2.
8.3 Controlling the VP-88K via Ethernet
Before trying to control the
VP-88K
via Ethernet, the unit must first be configured
according to the instructions in
Section 6.4
To control the VP-88K via Ethernet:
.
Figure 23: Controlling the VP-88K via Ethernet
1. Connect the Ethernet port on Machine number 1 to the LAN port of your PC
either:
•
Via a network switch (as shown in
Figure 23
)
•
Using a straight-through cable directly using a crossover cable
2. Set the Machine number on the
VP-88K
to be Machine 1 (see
Section 6.5
1 Set the first unit to Machine number 2, the second unit to Machine number 3, and so on up to 16
).
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203