KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VP-81KSi 8x1 UXGA/Audio STEP-IN Switcher
10
5. Connect the RJ-45 AV ON CAT 5 output connector to a compatible TP
receiver (for example, TP-120).
6. Connect the unbalanced audio 3.5mm AUDIO OUTPUT jack to an
unbalanced audio acceptor (for example, power amplifier).
7. Connect the balanced audio 5-pin terminal block (see
Section 6.1
) to an audio
acceptor
1
8. Connect up to eight remote, contact closure input selection switches to the
REMOTE terminal block (see
.
Section 6.2
9. Connect a PC over a LAN to the Ethernet for remote operation.
).
10. Set the DIP-switches (see
Section 6.6.1
RS-232 port (see
) for remote operation. You can
connect a PC and/or controller to the:
Section 6.3
RS-485 port (see
)
Section 6.6.1
11. Connect
)
1
the power cord
2
6.1 Connecting the Balanced/Unbalanced Stereo Audio Output
.
This section illustrates how to wire the devices to the balanced audio output:
•
A balanced stereo output connection, see
Figure 4
•
An unbalanced stereo output connection, see
Figure 5
Figure 4: Balanced Stereo Audio Connection
Figure 5: Unbalanced Stereo Audio Connection
1 Not shown in the illustration
2 We recommend that you use only the power cord that is supplied with this machine
gpd.sunwayinfo.com.cn
