KRAMER: SIMPLE CREATIVE TECHNOLOGY
Kramer Protocol
28
12 Kramer Protocol
1
By default, the
VP-81K
is set to protocol 3000 (see section 12.2) but is also
compatible with Kramer’ s Protocol 2000 (see section 12.3). Section 12.1
describes how to switch between protocol 3000 and protocol 2000.
12.1
Switching Protocols
You can switch protocols either via the front panel buttons (see section 12.1.1)
or the protocol commands (see section 12.1.2).
12.1.1 Switching Protocols via the Front Panel Buttons
To switch from protocol 3000 to protocol 2000 via the:
Front panel buttons, press the IN 1 and IN 2 button simultaneously
Infrared remote control transmitter, press the TAKE button and then 13
To switch from protocol 2000 to protocol 3000 via the:
Front panel buttons, press the IN 1 and IN 3 button simultaneously
Infrared remote control transmitter, press the TAKE button and then 16
12.1.2 Switching Protocols via Protocol Commands
To switch from protocol 3000 to protocol 2000, send the following command:
#P2000<CR>
To switch from protocol 2000 to protocol 3000, send the following command:
0x38, 0x80, 0x83, 0x81
The Windows®-based Kramer control software
2
operates with Protocol 2000.
If the
VP-81K
is set to Protocol 3000, it is automatically switched to
Protocol 2000.
1 You can download our user-friendly “ Software for Calculating Hex Codes for Protocol 2000” from the technical support
section on our Web site at: http://www.kramerelectronics.com
2 Download the latest software from our Web site at http://www.kramerelectronics.com
