KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VP-81K 8x1 UXGA / Audio Switcher
16
2. Select the method to connect to the Ethernet port of the
VP-81K
.
Select:
Ethernet, if you know the IP address number or the machine name.
The default name for the machine is KRAMER_XXXX
1
.
Serial, if you are connected via a serial port
3. Click OK.
The P3K Wizard screen appears
2
.
Figure 10: Device Properties Screen
4. If required, make changes and click Set. If not, click Close.
1 The four digits are the last four digits of the machine’ s serial number.
2 Do not use P3K Wizard to upgrade the firmware. To upgrade the firmware, see section 8