2.2.8.
Display Output
Three output connectors are provided which are useable simultaneously, provided that the input signal
is not HDCP encrypted.
When the input signal has HDCP encryption, the DVI-D output connector will carry a similarly HDCP
encrypted signal, the VGA and 3G-SDI connectors will be disabled.
When an HDCP encrypted signal is input, but the display device does not support HDCP, the
output image will turn black and a message indicating HDCP Signal will come up to indicate this.
There is a DVI-D output and a VGA style output. Both conform to normal VESA standards for
connectors and pin outs for these signal types.
The DVI-D connector will support HDMI with 36-bit video and audio formats when connected to a
suitable HDMI receiver. The color depth of the HDMI signal is determined by the set-up of VP-794 and
the capabilities of the monitor. The bit depth per color channel is displayed in the output section of the
menu system
The 3G-SDI BNC output supports the same formats as accepted by the 3G-SDI input.
Note:
The processor’s HDCP compliance can be turned off. This is of importance particularly when
using a MAC computer as the source. A MAC will encrypt it’s output signal if a compliant device is seen
attached to it’s output. By turning off the HQView processor’s compliance the MAC will see a non-
compliant device and therefore will not encrypt its output.
