![background image](http://html1.mh-extra.com/html/kramer/vp-727xl/vp-727xl_user-manual_2001261016.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VP-727xl
12
6 Connecting the VP-727xl
The
VP-727xl
is a universal presentation matrix switcher / scaler that lets you
choose what sources to connect to the inputs. For example, you can connect
just four sources: an RGBHV source, an HDMI source, an HDTV source and
an RGBS source (as the example in Figure 3 shows).
To connect
1
the
VP-727xl
as illustrated in the example in Figure 3, do the
following:
1. Connect the following video sources:
An RGBHV (high resolution) computer graphics source to the
R/PR, G/Y/CV, B/PB/C, HS/CS and VS BNC INPUT 1 connectors
An HDMI source to the INPUT HDMI 2 connector
An HDTV satellite receiver source to the R/PR, G/Y/CV, and
B/PB/C BNC INPUT 6 connectors
An RGBS (separate composite sync) computer graphics source to
the R/PR, G/Y/CV, B/PB/C, and HS/CS BNC INPUT 8 connectors
2. Connect the PROGRAM OUT:
HDMI connector to the plasma display
VGA HD15F connector to the analog display
R/PR, G/Y, B/PB, (PR, Y, PB) BNC OUTPUT connectors to the
YUV acceptor, for example, a projector
3. Connect the PREVIEW OUT R/PR, G/Y, B/PB, HS and VS BNC
OUTPUT connectors to the display
4. Connect the power cord
2
.
5. If required, connect:
A PC via RS-232, see section 7.1
The Kramer
VP-727A
Audio Switcher
via the AUDIO CONTROL
port, see section 7.2
The Kramer
VP-727T
Presentation Switcher Control Panel
via the
RS-485 port, see section 7.3
The ETHERNET port, see section 7.4
1 Switch OFF the power on each device before connecting it to your VP-727xl. After connecting your VP-727xl, switch on its
power and then switch on the power on each device
2 We recommend that you use only the power cord that is supplied with this machine