![background image](http://html1.mh-extra.com/html/kramer/vp-727xl/vp-727xl_user-manual_2001261018.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VP-727xl
14
Figure 4 shows an example of how to connect
1
8 sources to the rear panel of
the
VP-727xl
: an RGBHV source, an HDMI source, a CV source, a Y/C
source, a component video source, an HDTV source, an RGBCs source and
an RGB source.
To connect
2
the
VP-727xl
, as illustrated in the example in Figure 4, do the
following
3
:
1. Connect the following video sources
2
(see Figure 4):
An RGBHV (high resolution) computer graphics source to the
R/PR, G/Y/CV, B/PB/C, HS/CS and VS BNC INPUT 1 connectors
An HDMI source to the INPUT HDMI 2 connector
A set top box to the G/Y/CV BNC INPUT 3 connector
A DVD player to the G/Y/CV and B/PB/C BNC INPUT 4
connectors
A component source—for example, a Betacam video player—to the
R/PR, G/Y/CV, and B/PB/C BNC INPUT 5 connectors
An HDTV satellite receiver source to the R/PR, G/Y/CV, and
B/PB/C BNC INPUT 6 connectors
An RGBCs (separate composite sync) computer graphics source to
the R/PR, G/Y/CV, B/PB/C, and HS/CS BNC INPUT 7 connectors
An RGB camera to the R/PR, G/Y/CV, and B/PB/C BNC INPUT 8
connectors
1 Figure 4 and Figure 5 show how to connect several sources, and the PREVIEW/PROGRAM OUT connectors, respectively
2 As this particular example describes. As the VP-727xl is universal, you can connect any type (format) of video to the inputs
3 Switch OFF the power on each device before connecting it to your VP-727xl. After connecting your VP-727xl, switch on its
power and then switch on the power on each device