![background image](http://html1.mh-extra.com/html/kramer/vp-725xl/vp-725xl_user-manual_2002243020.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the Presentation Switcher / Scaler
16
7 Operating the Presentation Switcher / Scaler
The
VP-725xl
includes the following front panel buttons:
•
A set of 21 INPUT SELECTOR buttons
•
Video Group and Scaler Mode SELECT buttons
•
A PIP button
•
A FREEZE button
•
A set of 7 OSD buttons (described in
Table 1
): OSD ON, MENU,
ENTER, -, +, UP, and DOWN
This section describes how to:
•
Switch an input to an output (see section
7.1
)
•
Use the PIP feature (see section
7.2
)
•
Lock and unlock the front panel buttons (see section
7.3
)
•
Freeze the image (see section
7.4
)
•
Display a blank screen (see section
7.5
)
7.1 Switching an Input in the Video Group Mode/Scaler Mode
The
VP-725xl
can operate in two different modes:
•
The Video Group mode, in which you can switch an input (from 1 to 4) to
an output in each of the five Video Groups: composite video, s-Video,
component video (RGB or YPbPr), HDMI and UXGA. Note that the
HDMI Group Output is momentarily lost during switch transitions in the
unit
•
The Scaler mode, in which you can select one of the 21 input buttons to
switch to the scaled outputs
When the
VP-725xl
is in use, both modes operate simultaneously, as well as
independently. That is, the Scaler output is available even when switching in
the Video Group mode, and visa-versa.
7.2 Understanding the PIP Feature
1
The Picture-in-Picture inserter (PIP) is used for the simultaneous display of
video and graphic sources, and lets you display:
•
An inserted video source
2
PIP over a graphic source
3
•
An inserted graphic source
3
PIP over a video source
2
1 See section
8.1.4
2 That is, composite, s-Video
3 That is, HDMI or UXGA or component