6
VP-506 - Connecting the VP-506
4
Connecting the VP-506
Always switch off the power to each device before connecting it to your
VP-506
. After connecting your
VP-506
, connect its power and then
switch on the power to each device.
To connect your
VP-506
as the example in
Figure 2
illustrates, do the following:
1. Connect a DVI or VGA source to the DVI-I IN connector (for example, a PC
graphics card).
2. Connect the CV OUT RCA connector to the CV acceptor (for example, an
LCD display with speakers)
.
3. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity.
4. Adjust the scan converter features if required (see
Section
5.3
).
Figure 2: Connecting the VP-506
DVI/UXGA Scan Converter
i
