VP-506 - Operating the VP-506
7
5
Operating the VP-506
You can operate your
VP-506
via the front panel buttons, which are dual-purpose
buttons (except for the MENU button) that function as:
Quick-set buttons: FREEZE and OS/US; or
Menu buttons: MENU, ENTER,
– and +
This section describes how to:
Use the quick set buttons (see
Section
5.1
)
Use the set of menu buttons (see
Section
5.2
)
Use the Menu screen (see
Section
5.3
)
Use the test patterns (see
Section
5.4
)
Save and recall (see
Section
5.5
)
5.1
Using the Quick-Set Buttons
The following sub-sections describe the
VP-506
quick set buttons.
5.1.1
Using the FREEZE Button
Press the FREEZE button to freeze the picture on the screen. The frozen picture is
displayed regardless of the signal on the input to the unit. This allows you, for example,
to change the programs on the PC, and set up the next image.
By pressing the FREEZE button again, the frozen image will be replaced by the
most current image on the input to the unit.
5.1.2
Using the OS/US Button
Press the OS/US button to toggle between overscan and underscan:
Overscan generally has no border and the displayed image is usually larger
than the screen
This makes the data bigger and easier to read with the possibility of having some of it
run off the edge of the screen.
