Your VP-503xl/VP-504xl Scan Converter
5
Table 1: VP-503xl UXGA Scan Converter Features
#
Feature
Function
1
RS-232
DB 9F Port
Connect to the PC or Remote Controller
2
INPUT
HD15F Connector
Connect to the computer graphics source
3
PAL Dipswitch
Select the video standard (ON for PAL, OFF for NTSC)
4
CV OUT
BNC Connector
Connect to the composite video acceptor
5
Y/C OUT
4p Connector
Connect to the s-Video acceptor
6
12V DC
+12V DC connector for powering the unit
7
OS
LED
Lights when the image is over-scanned
1
8
FREEZE
LED
Lights when the FREEZE button is pressed
9
MENU
Button
Press to enter the menu and adjust the Scan Converter features
10
ENTER / AUTO IMAGE
Button
2
Press ENTER to accept the settings; press AUTO IMAGE to acquire
optimal screen display
11
- / FREEZE
Button
2
Press - to scroll down the menu; press FREEZE to freeze the video
image and features. Press again to disable
12
+ / OS/US
Button
2
Press + to scroll up the menu; press OS/US to toggle between
over-scan
1
and under-scan
3
4.2 Your VP-504xl UXGA/HD Scan Converter
Figure 3
,
Figure 4 and Table 2 describe the
VP-504xl
:
Top Side Panel
Lower Side Panel
Figure 3: VP-504xl UXGA/HD Scan Converter
1 The displayed image, when set correctly, is larger than the screen (see section 6.1.3)
2 This button has dual functionality. When in the MENU mode, it functions according to the labeling above the button. When
not in the MENU mode, the labeling below the button takes precedence
3 The image is smaller than the screen, leaving a border around the image (see section 6.1.3)
