![background image](http://html1.mh-extra.com/html/kramer/vp-473/vp-473_user-manual_2001733008.webp)
VP-473 - Connecting the VP-473
5
4
Connecting the VP-473
Always switch off the power to each device before connecting it to your
VP-473. After connecting your VP-473, connect its power and then
switch on the power to each device.
To connect the VP-473, as illustrated in the example in
Figure 2
:
1. Connect the SDI video source (for example, a digital camera) to the SDI IN
BNC connector.
2. Connect the SDI OUT BNC connector to the SDI display.
3. Connect the LEFT and RIGHT AUDIO OUT RCA connectors to the
unbalanced stereo audio amplifier.
4. Connect the PC/HD OUT connector to the graphics acceptor (for example, a
plasma display). If using a 15-pin HD to component cable, connect the pins
as shown in the following table.
You can use a breakout cable, such as the Kramer C-GM/3RVF. If you have a VGA to a
5BNC cable, use the RGB connections only.
Pin Number
Signal
1 Pr
2 Y
3 Pb
6, 7, 8
Ground
5. Connect the 5V DC power adapter to the 5V DC power socket and to the
mains electricity (not shown in the illustration).
i
Summary of Contents for VP-473
Page 2: ......
Page 9: ...6 VP 473 Connecting the VP 473 Figure 2 Connecting the VP 473 3G HD SDI to PC HD Scaler ...
Page 14: ......