Operating the VP-471 3G HD-SDI to DVI Scaler
7
2. Press the + or
–
button to highlight COLOR.
COLOR changes to green.
3. Press ENTER.
The Display submenu is displayed.
4. Press the + or
–
button to highlight G OFFSET.
G OFFSET changes to green.
5. Press ENTER.
The G OFFSET parameter changes to red.
6. Press the + button to increase the value to 42.
7. Press ENTER to set the value.
G OFFSET is highlighted in green.
8. To exit normal operation, press MENU.
6.2.1 The Main Menu
Table 3
defines the Main menu parameters and functions.
Table 3: The Main Menu Parameters and Functions
Parameter
Function
DISPLAY
Sets the output resolution, size and aspect ratio (see
Table 4
)
COLOR
Sets the output color parameters (see
Table 5
)
SDI AUDIO
Selects which embedded audio to output: Group 1, Group 2, Group 3, Group 4, Auto
1
,
Off
2
Default: Auto
FACTORY RESET Resets all parameters to factory defaults
INFORMATION
Displays current input resolution, output resolution and firmware revision
AUTO SYNC OFF When on, this de-activates the output after a few minutes if no input is present
3
EXIT
Exits the Main menu
6.2.2 The Display Submenu
The Display submenu sets the display output resolution, size and aspect ratio.
Table 4
defines the display output parameters.
1 When set to Auto, the unit searches for the lowest Group number which has audio and selects this audio Group
2 Audio is not outputted
3 Useful, for example, when the output is connected to a projector, and the projector will automatically shut down when it has no input
