VP-461 - Controlling the VP-461
35
35
7
Controlling the VP-461
The
VP-461
can be controlled via:
The front panel buttons (see
Section
7.1
)
The OSD menu (see
Section
7.2
)
The infrared remote control transmitter (see
Section
7.4
)
7.1
Controlling via the Front Panel Buttons
The
VP-461
includes the following front panel buttons:
Input selector buttons for selecting the required input: PC, HDMI and
DisplayPort (see
Section
7.1.1
)
PIP and FREEZE buttons (note, these buttons illuminate when selected)
MENU, ENTER (right arrow), left arrow and up, down, arrow buttons
Output Volume up (+) and down (-) buttons (when not in the OSD mode)
RESET TO 720p/XGA and PANEL LOCK buttons
7.1.1
Using the INPUT Front Panel buttons
When selected, an INPUT front panel button behaves as follows:
Selecting the:
Causes the button to:
Main input button
Illuminate continuously
PiP input button
Blink (the light On period is shorter than the light Off period)
Same Main input button and
PiP button
Blink (the light On period is longer than the light Off period)
If you want to adjust the image of a selected input in a window, press
that input button again (up to 3 times) for fast tuning. Pressing that
input button for the fourth time initiates full tuning of the window.
7.2
Controlling via the OSD Menu
You can change PiP Window parameters, main window parameters and entire
system parameters via the OSD menu, as described in
Section
5
.
i
Summary of Contents for VP-461
Page 1: ...KRAMER ELECTRONICS LTD USER MANUAL MODEL VP 461 Video Scaler P N 2900 300195 Rev 1...
Page 2: ......
Page 3: ......
Page 58: ......