8
VP-461 - Connecting the VP-461
4
Connecting the VP-461
Always switch off the power to each device before connecting it to
your
VP-461
. After connecting your
VP-461
, connect its power and
then switch on the power to each device.
You do not have to connect all the inputs and outputs, connect only
those that are required.
To connect the
VP-461
, as illustrated in the example in
Figure 2
, do the following:
1. Connect a computer graphics source to the PC VIDEO INPUT 15-pin HD
connector.
2. Connect an HDMI source (for example, a DVD player) to the HDMI VIDEO
INPUT connector.
Alternatively, you can connect the DVI connector on the DVD player to the HDMI
connector on the
VP-461
via a DVI-HDMI adapter
3. Connect a DisplayPort video source (for example, a computer graphics
source) to the DISPLAYPORT VIDEO INPUT connector.
4. Connect the audio input signal to the AUDIO PC IN 3.5mm mini jack (not
shown in
Figure 2
).
5. Connect the HDMI VIDEO OUTPUT connector to an HDMI acceptor (for
example, a plasma display).
6. Connect the PC VIDEO OUTPUT 15-pin HD connector to a VGA acceptor
(for example, an analog display).
7. Connect the AUDIO OUT 3.5mm mini jack to an audio acceptor, not shown
in
Figure 2
.
8. Connect a PC and/or controller to the RS-232 terminal block (see
Section
7.3
)
9. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in
Figure 2
).
!
i
Summary of Contents for VP-461
Page 1: ...KRAMER ELECTRONICS LTD USER MANUAL MODEL VP 461 Video Scaler P N 2900 300195 Rev 1...
Page 2: ......
Page 3: ......
Page 58: ......