Step 5: Connect the power
Connect the power cord to
VP-440H2
and plug it into the mains electricity.
Safety Instructions (See
for updated safety information)
Caution:
•
For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.
•
There are no operator serviceable parts inside the unit.
Warning:
•
Use only the power cord that is supplied with the unit.
•
Disconnect the power and unplug the unit from the wall before installing.
•
Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only.
•
To ensure continuous risk protection, replace fuses only according to the rating specified on the product label which located on the bottom of the unit.
Step 6: Control and operate VP-440H2 via the front panel buttons and via
Web pages:
OSD Menu:
Menu
Menu Items
Picture
Adjust contrast brightness and color and fine-tune the image.
Input
Select input source.
Output
Select method for 4K input to 4K output handling, image size and
resolution.
Audio
Select audio source, audio parameters (bass, treble and so on),
microphone settings and volume per input.
OSD
Set OSD position, transparency and so on.
Advanced
Select HDCP on each of the inputs and outputs, manage the EDID and
define IP settings.
Info.
View device information.
Factory
Reset to factory default settings.