#
Feature
Function
10
CONTROL (Tx, Rx, GND) Terminal
Block Connectors
Connect to the PC or the serial controller to control the device.
11
HDBT IN (Tx, Rx, GND) Terminal
Block Connectors
Connect to a controller to control peripheral devices that are connected to the
HDBT transmitter (for example, a Blu-ray player connected to
WP-20
).
12
HDBT OUT (Tx, Rx, GND) Terminal
Block Connectors
Connect to a controller to control peripheral devices that are connected to the
HDBT receiver (for example, a projector connected to
TP-580Rxr
).
13
AUDIO INPUT
Unbalanced
Stereo 3.5 Mini
Jack
HDMI
Connect to the analog audio HDMI source (from 1 to 3).
14
PC
Connect to the analog audio computer graphics source.
15
AUDIO OUT 3.5 Mini Jack
Connect to an unbalanced stereo audio acceptor.
16
ETHERNET Connector
Connects to the PC or other controller through computer networking.
17
VIDEO INPUT
Connectors
HDBT IN RJ-45
Connect to an HDBT transmitter (for example,
WP-20
).
Can supply PoE (up to 13W) to the transmitter.
18
HDMI IN
Connect to the HDMI source (from 1 to 3).
19
PC IN on15-pin
HD
Connect to the computer graphics source.
20
HDBT OUT RJ-45 Connector
Connect to an HDBT receiver (for example,
TP-580Rxr
).
21
HDMI OUT Connector
Connect to the HDMI acceptor.
22
48V DC Power Terminal Block
+48V DC connector for powering the unit.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Step 3: Install VP-440H2
Install
VP-440H2
using one of the following methods:
•
Attach the rubber feet and place the unit on a flat surface.
•
Mount the unit in a rack using the recommended rack adapter
www.kramerav.com/product/VP-440H2
•
Ensure that the environment (e.g., maximum ambient temperature &
air flow) is compatible for the device.
•
Avoid uneven mechanical loading.
•
Appropriate consideration of equipment nameplate ratings should be
used for avoiding overloading of the circuits.
•
Reliable earthing of rack-mounted equipment should be maintained.