Kramer VP-437, User Manual

Page: 10 / 25

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VP-437 Presentation Switcher / Scaler
8
Table 2: VP-437 Presentation Switcher / Scaler Rear Panel Features
# Feature Function
19 HDMI Connector Connect to the HDMI source (from 1 to 2)
20 VGA HD15F Connector Connect to the computer graphics source
21 CV RCA Connector Connect to the composite video source
22 YC 4p Connector Connect to the s-Video source
23 P
R
/C
R
RCA Connector
24 P
B
/C
B
RCA Connector Connect to the component video source
1
(from 1 to 2)
25
V
ID
E
O
IN
P
U
TS
Y RCA Connector
26 R BNC Connector
27 G BNC Connector
28 B BNC Connector Connect to the RGBHV video acceptor
29 H BNC Connector
30 V BNC Connector
31 HDMI Connector Connect to the HDMI acceptor
32
V
ID
E
O
O
U
TP
U
TS
VGA HD15F Connector Connect to a VGA acceptor
33 HDMI Connect to the analog audio HDMI source (from 1 to 2)
VGA Connect to the analog audio computer graphics source
COMP Connect to the analog audio component video source (from 1
to 2)
CV Connect to the analog audio composite video source
AUDIO IN
Unbalanced Stereo
Terminal Block
Connectors
YC Connect to the analog audio s-Video source
34 RS-232 DB 9F Port Connect to the PC or the remote controller
35 S/PDIF OUT RCA Connector Connect to a digital audio acceptor
36 ETHERNET Connector Connects to the PC or other Serial Controller through computer
networking
37 Power Connector with Fuse AC connector, enabling power supply to the unit
1 For component video, connect all three connectors: Y, Pr/Cr, Pb/Cb (also known as YUV)