KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VP-437 Presentation Switcher / Scaler
10
6 Connecting the VP-437 Presentation Switcher / Scaler
To connect
1
your
VP-437
, as illustrated in the example in Figure 2, do the
following:
1. Connect an HDMI source (for example, a DVD player) to the HDMI 1
VIDEO INPUT connector
2
.
2. Connect a computer graphics source to the VGA HD15F VIDEO INPUT
connector.
3. Connect a composite video source (for example, a composite video player)
to the CV VIDEO INPUT RCA connector.
4. Connect an s-Video source (for example, an s-Video player) to the YC 4p
VIDEO INPUT connector.
5. Connect a component video source (for example, a component video
player) to the COMP 1 P
R
, P
B
and Y, VIDEO INPUT RCA connectors.
6. Connect the audio input signals to the AUDIO IN terminal block
connectors, as required (not shown in Figure 2).
7. Connect the RGBHV VIDEO OUTPUT BNC connectors to an RGBHV
acceptor (for example, an RGBHV display).
8. Connect the HDMI VIDEO OUTPUT connector to an HDMI acceptor
(for example, a plasma display).
9. Connect the VGA VIDEO OUTPUT HD15F connector to a VGA
acceptor (for example, a projector).
10. Connect the power cord
3
(not shown in Figure 2).
1 You do not have to connect all the inputs and outputs, connect only those that are required
2 Alternatively, you can connect the DVI connector on the DVD player to the HDMI connector on the VP-437 via a
DVI-HDMI adapter. When using this adapter, you can connect the audio signal via the terminal block connector
3 We recommend that you use only the power cord that is supplied with this machine
