KRAMER: SIMPLE CREATIVE TECHNOLOGY
Controlling the VP-436
12
7 Controlling the VP-43
The
VP-436
can be controlled via:
The front panel buttons (see section 7.1)
The OSD menu (see section 7.2)
RS-232 serial commands transmitted by a touch screen system, PC, or
other serial controller (see section 7.3)
The infrared remote control transmitter (see section 7.4)
7.1 Controlling via the Front Panel Buttons
The
VP-436
includes the following front panel buttons:
Input selector buttons for selecting the required input: CV, YC,
COMPONENT (1 and 2), VGA or HDMI (1 and 2)
BLANK, MUTE and FREEZE buttons
MENU, ENTER, and arrow
1
buttons
RESET TO XGA/720p and PANEL LOCK buttons
2
7.2 Using the OSD Menu
The control buttons let you control the
VP-436
via the OSD menu.
Press the:
MENU button to enter the menu
3
ENTER button to accept changes and to change the menu settings
Arrow
1
buttons to move through the OSD menu, which is displayed on
the video output
On the OSD menu, select EXIT to exit the menu.
1 Up, down, left and right
2 As defined in Table 1
3 The default timeout is set to 10 seconds