Kramer VP-436, User Manual

Page: 10 / 25

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VP-436 Presentation Switcher / Scaler
8
Table 2: VP-436 Presentation Switcher / Scaler Rear Panel Features
# Feature Function
19 HDMI Connector Connect to the HDMI source (from 1 to 2)
20 VGA 15-pin HD Connector Connect to the computer graphics source
21 CV RCA Connector Connect to the composite video source
22 YC 4-pin Connector Connect to the s-Video source
23 P
R
/C
R
RCA Connector
24 P
B
/C
B
RCA Connector Connect to the component video source
1
(from 1 to 2)
25
V
ID
E
O
IN
P
U
TS
Y RCA Connector
26 R BNC Connector
27 G BNC Connector
28 B BNC Connector Connect to the RGBHV video acceptor
29 H BNC Connector
30 V BNC Connector
31 HDMI Connector Connect to the HDMI acceptor
32
V
ID
E
O
O
U
TP
U
TS
VGA 15-pin HD Connector Connect to a VGA acceptor
33 HDMI Connect to the analog audio HDMI source (from 1 to 2)
VGA Connect to the analog audio computer graphics source
COMP Connect to the analog audio component video source (from 1
to 2)
CV Connect to the analog audio composite video source
AUDIO IN
Unbalanced Stereo
Terminal Block
Connectors
YC Connect to the analog audio s-Video source
34 RS-232 9-pin D-sub Port Connect to the PC or the remote controller
35 LEFT Connect to the left stereo analog audio acceptor
36 RIGHT Connect to the right stereo analog audio acceptor
37
OUT RCA Connectors
S/PDIF Connect to a digital audio acceptor
38 Power Connector with Fuse AC connector, enabling power supply to the unit
1 For component video, connect all three connectors: Y, Pr/Cr, Pb/Cb (also known as YUV)