![background image](http://html.mh-extra.com/html/kramer/vp-427x1/vp-427x1_user-manual_2002003030.webp)
Kramer Electronics Ltd.
VP-427X1
– Using Embedded Web Pages
28
Configuring Network Settings
VP-427X1
enables you to use DHCP mode or to turn DHCP mode off and change Network
settings.
To configure Network settings:
1. Click
Device Settings
on the Navigation List.
The Device Settings page appears (see
).
2. Change Network settings as required:
a. In static mode (DHCP On is unchecked), change static Network settings as required:
For example, change the IP address.
Figure 19: Changing the IP Address
Click
Set Changes
. A confirmation message appears.
b. To select to work in DHCP mode instead of with static parameters, select the
DHCP
On
check box and click
Set changes
. A confirmation message appears.
3. Click
OK
to confirm the change.
The current web page session is disconnected. To access the web pages, reload with
the new setting.
Network settings are configured.