Connecting the VP-2K 1:2 UXGA / Audio Distributor
5
#
Feature
Function
10
AUDIO OUT 2 (L)
RCA
Connector
Connect to the left audio acceptor 2 channel
11
AUDIO OUT 2 (R)
RCA
Connector
Connect to the right audio acceptor 2 channel
12
COUPLING
Pushbutton
Press in for AC coupling, out for DC coupling
13
UXGA IN
15-pin HD (F) Connector
Connect to the UXGA source
14
UXGA OUT 1
15-pin HD (F)
Connector
Connect to the UXGA acceptor 1
15
UXGA OUT 2
15-pin HD (F)
Connector
Connect to the UXGA acceptor 2
16
5V DC
+5V DC connector for powering the unit
5
Connecting the VP-2K 1:2 UXGA / Audio Distributor
To connect the
VP-2K
, as the example in
Figure 2
illustrates:
1. Connect a computer graphics source to the UXGA IN 15-pin HD (F)
connector and to the R and L AUDIO IN RCA connectors.
2. Connect the UXGA OUT 15-pin HD (F) connectors to up to1 two
acceptors (for example, a display and a projector) and connect the respective
R and L AUDIO OUT RCA connectors to audio acceptors (for example,
two amplifiers with speakers).
3. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity (not illustrated in
Figure 2
).
4. If required:
Check that the SYNC PROC. button is pushed in, to activate
the sync processing
Adjust the AUDIO LEVEL, the UXGA LEVEL, and/or the
UXGA EQ. (equalization) compensation level
Set the coupling switch to AC or DC
Note
: The
VP-2K
can also distribute HDTV signals in YPbPr format over
a split cable
2
having the following pinout:
Table 2: 15-pin HD Connector Pinout for HDTV
PIN#
YPbPr SIGNAL
1
Pr
2
Y
3
Pb
1 When both outputs are not required, connect only the output that is required and leave the other output unconnected
2 For example, Kramer’s VGA to 3RCA breakout cable: C-GM/3RVF (not supplied)
