![background image](http://html1.mh-extra.com/html/kramer/vp-23rc/vp-23rc_user-manual_2001229031.webp)
Controlling the VP-23RC
27
6. Select Use the following IP Address, and fill in the details as shown in
Figure 15.
7. Click
OK
.
Figure 15: Internet Protocol (TCP/IP) Properties Window
Remember to restore your previous PC settings after setting the
VP-23RC
IP
If the Media/Room Controller is not yet configured you can control via the
Ethernet, the Presentation Switcher section only.
8.3.3
Connecting the ETHERNET Port via a Network Hub (Straight-Through
Cable)
After initially configuring the ETHERNET port, you can connect the Ethernet
port of the
VP-23RC
to the Ethernet port on a network hub or network router,
via a straight-through cable with RJ-45 connectors.