KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting a VP-1608 16x8 RGBHV/Balanced Audio Matrix
8
6
Connecting a VP-1608 16x8 RGBHV/Balanced Audio
Matrix
To connect a single
VP-1608
16x8 RGBHV/Balanced Audio Matrix
as
, do the following
1. Connect up to 16 RGBHV sources
:
2. Connect up to 8 RGBHV acceptors
(such as RGBHV graphics sources) to
the RGBHV INPUT BNC connectors.
(such as RGBHV projectors) to the
RGBHV OUTPUT BNC connectors.
3. Connect up to 16 stereo audio sources
to the AUDIO INPUT terminal
block connectors (see section
4. Connect up to 8 stereo audio acceptors
to the AUDIO OUTPUT terminal
block connectors (see section
5. Set the MACHINE # DIP-switches to MACHINE # 1, according to
, that is, set all switches OFF (see section
6. Set the DELAY DIP-switches, if required (see section
).
7. Connect a PC or other controller, if required, via the RS-232 (see section
6.2) or RS-485 ports (see section
8. Connect the power cord.
1 Note that you can connect up to 8
VP-1608
units to a PC or other RS-232 or RS-485 controller (see section
2 Switch OFF the power on each device before connecting it to your
VP-1608
. After connecting your
VP-1608
, switch on its
power and then switch on the power on each device
3 Not all sources or acceptors need to be connected