Kramer VP-1608, User Manual

Page: 13 / 42

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting a VP-1608 16x8 RGBHV/Balanced Audio Matrix
10
6.1 Connecting the Balanced/Unbalanced Stereo Audio
Input/Output
This section illustrates how to connect:
x
A balanced stereo audio input/output connection, see Figure 4
x
An unbalanced stereo audio input connection, see Figure 5
x
An unbalanced stereo audio output connection, see Figure 6
Figure 4: Connecting the
Balanced Stereo Audio
Input/Output
Figure 5: Connecting the
Unbalanced Stereo Audio
Input
Figure 6: Connecting an
Unbalanced Stereo Audio
Output
6.2 Controlling via RS-232 (for example, using a PC)
To connect a PC to the VP-1608 unit
1
x
Connect the RS-232 9-pin D-sub (F) rear panel port on the
VP-1608 unit to the null-modem adapter and connect the null-
modem adapter with a 9-wire flat cable
, using the null-modem adapter
provided with the machine (recommended):
2
To connect a PC to the VP-1608 unit
to the RS-232 9-pin
D-sub (F) port on your PC
1
, without using a null-modem adapter:
x
Connect the RS-232 9-pin D-sub (F) port on your PC to the
RS-232 9-pin D-sub (F) rear panel port on the
VP-1608 unit
2
, as
illustrated in Figure 7 (depending on whether the PC has a 9-pin
or 25-pin connector)
1 When connecting a single VP-1608 unit via RS-232, set the MACH. # DIP-switches to Machine # 1, according to Table 4
2 Up to 50 feet of cabling may be used for the RS-232 connection