Kramer Electronics Ltd.
VIA Campus², VIA Campus² PLUS
– For User: Participating in a VIA Meeting
90
Joining a VIA Meeting Manually
VIA Campus², VIA Campus² PLUS
enables you to manually enter credentials for joining a
VIA meeting.
To join a VIA meeting manually:
1. Connect your device to the same network that
VIA Campus², VIA Campus² PLUS
is
connected to.
2. Run the
Kramer VIA
app.
The Connect to a VIA window appears.
Figure 87: VIA App Window
3. Start typing the name or the IP address of the VIA meeting space to which you want to
connect.
The Meeting Spaces list appears.
If the relevant meeting space does not appear on the list, enter the name and click
Join
.
Check Remember for auto join check box under BLE for one-click login in case of
single IP discovery.
In bonjour broadcast, click star
next to gateway IP to add in your favorites.
One of the following statuses may appear next to a meeting space on the list:
•
Room Free for hh:mm minutes
– No user is logged in and a meeting will start after
the displayed amount of time.
•
Available
– No user is logged in, broadcast is not enabled, or Calendar is not
configured for
VIA Campus², VIA Campus² PLUS
.
•
In Use
– A user is logged in or a meeting is in progress (when Calendar is
configured).
•
In Use. Reserved for <hh:mm> minutes
– A meeting is in progress and will end after
the displayed amount of time.