Kramer Electronics Ltd.
VIA Campus², VIA Campus² PLUS
– For Installer: Connecting VIA Campus², VIA Campus² PLUS
12
VIA Campus², VIA Campus² PLUS
can be connected to a local area network (LAN). In
this setup, the default IP setting is DHCP that assigns an automatic IP address to your
unit. This enables easy Plug and Play setup when connecting your
VIA Campus², VIA
Campus² PLUS
to the network. To assign a static IP address, (see
).
5. Connect the Wi-Fi antennas to the Wi-Fi Antenna Ports
and
for using the built-in
wireless capability.
6. Connect powered speakers and a microphone to the AUDIO Mini Jacks
.
7. Connect the 19V DC power adapter to the Power Connector
and plug it into the
mains electricity.
Do not turn the device on before connecting the LAN port to the network.
8. Connect via Wi-Fi with any of the following types of devices:
To enable participation in a collaborative session (send and receive content), all
participant devices (PCs/ MACs/ smartphones/tablets) must be connected to the same
network (LAN - wired/wireless) as the
VIA Campus², VIA Campus² PLUS
.
▪
A Windows 7/8/10
®
(32-bit/64-bit) computer.
▪
A Macintosh
®
computer, using OSX 10.11.x or newer.
▪
An iPad/iPhone
®
tablet/smartphone with the VIA app installed (iPad 2 or later, iOS 10
or later).
When using the Airplay service, no application is needed. However, we recommend
using iOS 12, Mojave OSX, or higher, for a better experience.
▪
An Android
®
OS 5.x tablet/smartphone with the VIA app installed.
For using the Android mirroring feature, a device equipped with Android 5. 1 minimum is
required.
9. Connect a USB device to the USB 2.0 Connector
on the front panel.
VIA Campus²
,
VIA Campus² PLUS
is connected.
4
11
13
2