Kramer Electronics Ltd.
UTBUS-1xl
– Installing the UTBUS-1xl
7
2. Tighten the two screws (supplied with the power socket module).
The power socket is now installed.
Figure 3: Installing the Power Socket
Installing the Cables
To install the cables:
1. Connect the cables to the inside of the unit.
2. Insert the self-locking ties through the tie holes to secure the cables to the inside walls of
the enclosure.
Securing the UTBUS-1xl Enclosure to the Table
To install the UTBUS-1xl underneath the table (as illustrated in
Figure 4
):
1. Place the unit to the underside of the table and mark the correct location.
2. Insert the four wood screws into the four rim screw holes and fix the
UTBUS-1xl
to the table.
Figure 4: Securing the UTBUS-1xl Under the Table
The
UTBUS-1xl
is ready for use.
