Kramer TP-588D, User Manual

Page: 30 / 42

26 TP-588D - Protocol 3000
Command - FACTORY Command Type - System-mandatory
Command Name Permission Transparency
Set: FACTORY End User Public
Get: - - -
Description Syntax
Set:
Reset device to factory default
configuration
# FACTORY
␍
Get: - -
Response
~
nn
@ FACTORY
␠
OK
␍␊
Parameters
Response Triggers
Notes
This command deletes all user data from the device. The deletion can take some time.
Command - HDCP-MOD
Command Type - System
Command Name Permission Transparency
Set: HDCP-MOD Administrator Public
Get: HDCP-MOD? End User Public
Description Syntax
Set: Set HDCP mode
# HDCP-MOD
␠
inp_id,mode
␍
Get: Get HDCP mode
# HDCP-MOD?
␠
stage_id
␍
Response
Set / Get: ~ nn @ HDCP-MOD
␠
stage_id,mode
␍␊
Parameters
inp_id - input number (1.. max number of inputs)
mode - HDCP mode
Response Triggers
Response is sent to the com port from which the Set (before execution) / Get command was received
Response is sent to all com ports after execution if HDCP-MOD was set by any other external control
device (button press, device menu and similar) or HDCP mode changed
Notes
Set HDCP working mode on the device input:
HDCP supported - HDCP_ON [default]
HDCP not supported - HDCP OFF
HDCP support changes following detected sink - MIRROR OUTPUT