![background image](http://html1.mh-extra.com/html/kramer/tp-588d/tp-588d_user-manual_2001986016.webp)
12
TP-588D - Operating the TP-588D
To lock the current EDID
:
Set DIP-switch 1 to ON
Note
: When locking or unlocking the EDID the device must be rebooted.
6.3
LED Indicators
The LEDs on the front and rear panels provide status information as detailed below.
6.3.1
DVI Out LED
DVI Out LED Color
DVI Signal State
Green
DVI acceptor present
Flashes 10 times immediately
after connecting the output to
a non-HDCP acceptor, or after
the acceptor is powered up,
then lights solid
DVI acceptor present but acceptor does not
support HDCP
6.3.2
HDMI Out LED
HDMI Out LED Color
HDMI Signal State
Green
HDMI acceptor present
Flashes 10 times immediately
after connecting the output to
a non-HDCP acceptor, or
after the acceptor is powered
up, then lights solid
HDMI acceptor present but acceptor does
not support HDCP
6.3.3
HDBT LINK LED
HDBT LED Color
HDBT Link State
Green
Valid HDBT link
Off
HDBT link not valid
6.3.4
Power LED
Power LED Color
Power State
Green
The device is plugged into a power supply
Orange
The device is operating on PoE and receiving
power from a PoE provider
Summary of Contents for TP-588D
Page 1: ...USER MANUAL MODEL TP 588D HDBT to DVI HDMI Receiver P N 2900 300325 Rev 2 www kramerAV com...
Page 2: ......
Page 3: ......
Page 41: ......