Kramer TP-588D, User Manual

Page: 12 / 42

8 TP-588D - Defining the TP-588D HDBT to DVI/HDMI Receiver
Figure 2 defines the rear panel of the TP-588D .
Figure 2: TP-588D HDBT to DVI/HDMI Receiver Rear Panel
# Feature Function
1 OPTION 4-way DIP-switch For setting device functions, (see Section
‎6.1
)
2 S/PDIF Digital Audio RCA
Connector
Connect to the stereo, digital audio acceptor
3 AUDIO OUT 5-pin
Terminal Block
Connect to the balanced, stereo audio acceptor, (see
Section
‎5.2
)
4 RS-232 DATA 3-pin Serial
Terminal Block
Connect to the RS-232 serial transmitter or receiver.
Note : Data is transmitted even in the absence of video and audio
signals
5 FACTORY RESET Button Press and hold for at least 5 seconds, or press while performing
a power cycle to reset the device to default settings, (see
Section
‎6.4
)
6 HDBT IN RJ-45 TP
Connector
Connect to a compatible HDBaseT switcher/transmitter, (for
example, the TP-580Txr, WP-5VH2, or the SID-X2N)
7 LINK LED Lights green when there is a valid link to the HDBT transmitter,
(see
Section
‎6.3
)
8 12V DC Connector Connect to the supplied power adapter, center pin positive, (see
Section
‎3.1
)
9 USB PROG. Mini USB
Connector
Connect to a PC to perform a firmware upgrade
10 ETHERNET RJ-45 TP
Connector
Connect to an Ethernet LAN
11 LEDS 5-pin Terminal
Block
Connect to remote LED indicators, (see Section
‎6.3
)
12 RS-232 3-pin Serial
Terminal Block
Connect to the RS-232 controller or PC