KRAMER: SIMPLE CREATIVE TECHNOLOGY
Defining the TP-145/TP-146
6
(660ft) with a Kramer
TP-141
/
145
transmitter over TP cabling. In addition, the
TP-146
features:
•
Level and Equalization control for the UXGA signal
•
The capability to change the polarity of the vertical and horizontal sync signals
•
24 bit 48kHz S/PDIF digital audio
Figure 2
and
Table 2
define the
TP-146
UXGA/Audio/Data Line Receiver.
Figure 2: TP-146 UXGA/Audio/Data Line Receiver Front and Rear Panels
Table 2: TP-146 UXGA/Audio/Data Line Receiver Front and Rear Panel Features
#
Feature
Function
1
LINK
LED
Lights green when a link is established
2
LEVEL
Trimmer
Adjusts the output signal level
3
EQ.
1
Adjusts the cable compensation equalization level
Trimmer
4
ON
LED
Lights green when the unit receives power
5
UXGA OUT
15-pin HD (F) Connector
Connect to the UXGA acceptor
6
LINE IN
RJ-45 Connector
Connect to the LINE OUT RJ-45 connector
2
7
on the TP-145
RS-232
Terminal Block
Connect to the controlled unit
8
AUDIO
OUT
ANALOG
3.5mm Mini
Connector
Connect to the analog audio acceptor
9
S/PDIF
RCA Connector
Connect to the digital audio acceptor
10
12V DC
Connector
Connect to the su12V DC power adapter. Center pin
positive
1 Degradation and UXGA signal loss can result from using long cables (due to stray capacitance), sometimes leading to a total loss of
sharpness in high-resolution signals
2 Using a TP cable with RJ-45 connectors at both ends (pinout is defined in
Figure 6
and
Table 5
)