Kramer TBUS-9, User Manual

Page: 7 / 13

Your TBUS-9
5
Table 1: TBUS-9 Table Connection Bus Features
# Feature Function
1 Connecting Surface See Figure 3 and Table 2
2 Anodized Lid Covers the connecting surface, leaving the table surface neat and tidy
3 Mounting Plate Outer Rim Fits over the table surface
4 Enclosure Inserts into the table cutout
5 Height Adjustment Screws Eight screws for adjusting the height of the connecting surface, two on
each panel
6 Rubber Protectors Protect the table surface when mounting the unit (one on each side)
7 Locking Butterfly Screws Tighten to lock the moun ing butterfly screw (one on each side)
8 Mounting Brackets Fit in the bracket slits after inserting the enclosure into the table – to
secure the unit to the table surface (one on each side)
9 Mounting Butterfly Screws Tighten to secure the unit to the table surface (one on each side)
10 Tie Holes
1
Anchor the self-locking ties to secure the pass-through cables to the
inside walls of the unit (6 pairs of holes, 3 pairs on the front and 3
pairs on the rear panel)
11 Protective Rubber Guard Protects the mounting plate outer rim during shipping. Remove before
installing unit
Figure 3 and Table 2 define the connecting surface:
Figure 3: TBUS-9 Connecting Surface
Table 2: TBUS-9 Connecting Surface Features
# Feature Function
1 Split Brackets Support the split grommet for the pass through-cables
2 Split Grommets Push apart slightly to insert cables
3 Power Socket Power socket for PC or o her device
1 Some versions may not include tie holes