KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the TBUS-1
6
5.1 Cutting an Opening
Figure 4 illustrates the cutout template (not to scale) defining the surface you
have to cut out to install your
TBUS-1
.
130+2mm
180+2mm
(5.12+0.08")
(7.08+0.08")
Figure 4: Cutout Dimensions
Using a sabre saw or a keyhole saw, cut out the wooden surface in which you
want to insert the
TBUS-1
. Take care not to cause damage to the table.
5.2 Installing the Required Wall Plates
By default, the mounting surface includes a universal power supply, two cable
pass-through plates and four blank plates for optional video, audio, telephone
and network connectors.
Any of the plates mounted to the Connecting Surface can be rearranged or
removed and replaced with Kramer passive wall plates
1
or connector modules
for interfacing A/V type signals.
1 The complete list of Kramer wall plates and module connectors is on our Web site at http://www.kramerelectronics.com