Kramer TBUS-1, User Manual, Page: 7 / 13

Connecting the TBUS-1
5
Figure 3 and Table 2 define the Connecting Surface:
Figure 3: TBUS-1 Connecting Surface
Table 2: TBUS-1 Connecting Surface Features
# Feature Function
1 Blank Plates Four blank covers that can be replaced with wall plates as
required (see section 5.2)
2 Split Grommets Push apart slightly to insert cables
3 Split Brackets Support the split grommet for the pass through-cables
4 Universal Power Socket Suitable for international power requirements
5 Adjustable Height Screw
Holes
Six holes for adjusting the height of the Connecting Surface.
Two on each side panel, one for front panel and one for the rear
panel
5 Connecting the TBUS-1
This section describes how to connect the TBUS-1 :
Cut an opening in the table (see section 5.1)
Mount the required wall plate items (see section 5.2)
Set the height of the Connecting Surface (see section 5.3)
Insert the
TBUS-1
through the hole (see section 5.4)
Connect the cables (see section 5.5)
Secure the unit to the table (see section 5.6)