SID-X3N - Operating the SID-X3N
13
13
7
Operating the SID-X3N
This chapter describes the operating procedures of the
SID-X3N
and comprises:
Manually selecting an input (see
Section
7.1
)
Taking control of the switcher input (see
Section
7.2
)
Locking the EDID (see
Section
7.3
)
Audio mode selection (see
Section
7.4
)
Powering up the
SID-X3N
recalls the last settings (that is, the configuration of the
device when it was powered down) from the non-volatile memory.
7.1
Manually Selecting an Input
Note
: When the button is lit it is inactive and pressing the button will not activate
the input
To manually select an input
:
Press the INPUT SELECT button repeatedly until the required input is active
as indicated by the associated LED
Note
: The manual selection overrides the video selection mode set when in last
connected mode and remains in effect until the device is power cycled.
7.2
Taking Control of the Switcher Input When Connected
to the VS-62H
To activate the input of the
VS-62H
to which the
SID-X3N
is connected, press the
STEP-IN button. If the
VS-62H
grants the
SID-X3N
access to the input, the STEP-
IN button lights. If the
VS-62H
does not grant access for some reason, the button
flashes for a few seconds and then does not light. This may be because the
VS-62H
input connected to the
SID-X3N
has been set to have a lower priority than
the currently active input.
Note:
Input priority on the
VS-62H
is set using the Kramer Control Software.
Summary of Contents for SID-X3N
Page 1: ...KRAMER ELECTRONICS LTD USER MANUAL MODEL SID X3N Step in Commander P N 2900 300304 Rev 2...
Page 2: ......
Page 3: ......
Page 21: ......