17
KRAMER ELECTRONICS LTD.
Connecting to Horizontal and Vertical Sync acceptors
The horizontal and vertical sync acceptors should be connected to the VER and HOR BNC connectors, using
standard high quality video cables.
Connecting to an External reference (Genlock)
An external reference source should be connected, if needed, to the REF-IN connectors. A loop connection is
provided for the reference IN connection. If looping is used, the 75 termination switch should be released. If
looping is not used, the switch should be pushed in for 75 proper termination.
Connecting to a PC
Connect the PC COM port to the provided Null Modem adapter. Connect the Null modem adapter to the RS-
232 port of the SG-6005 using a flat cable with the appropriate sockets.
TURNING ON
THE MACHINE
NOTES
1)
The machine should only be turned on after all connections are
completed and all source devices have been turned on. Do not attempt
to connect or disconnect any video signal to the machine while it is
turned on.
2)
The socket-outlet should be near the equipment and should be easily
accessible. To fully disconnect equipment, remove the power supply
adapter from the mains socket.
1) Connect the machine's mains socket to the wall socket using the power cord (provided with the machine).
2) Operate the source and the acceptors.
3) Select the required functions of the SG-6005 using the instructions described above.