To mount a unit on the RK-UT1:
1. Place the first unit on the rack (for example, the
Kramer
PA-120Z
).
2. While holding the
PA-120Z
in place, flip over the
RK-UT1
.
3. Attach the appropriate number of M3x5 screws
(supplied) through the holes on the
RK-UT1
to the
underside of the
PA-120Z
.
4. Repeat steps 1 to 3 for all additional devices.
To install the RK-UT1 underneath a table:
1. Place the unit on the underside of a table and mark
the correct location (of the table mounting screw
holes).
2. Insert the six M4.2X18
wood screws (supplied) into
the six rim screw holes (three on each side) and
tighten them to attach the
RK-UT1
to the table.
If your Kramer device does not have screw holes on its
underside, mount it via the screw holes on the sides of
the
RK-UT1
.
To mount a blank panel (optional) to cover any empty
rack spaces:
1. Place the blank panel in place.
2. Insert two M3x5 screws through the holes on the
RK-UT1
that fit the holes on the blank panel
(optional, not supplied).
Technical Specifications
Environmental
Conditions
Temperature Range
-40° to +70°C (-40° to 158°F)
Humidity
10% to 90%, RHL non-condensing
Regulatory Compliance
Safety
CE
Environmental
RoHs, WEEE
Enclosure
Type
Aluminum
General
Net Dimensions
19-inch (W), 7-inch (D) 1U (H)
Shipping Dimensions (W, D, H)
49.5cm x 20.2cm x 5cm
(19.5" x 7.95" x 1.97")
Net Weight
2.18kg (4.8lbs)
Shipping Weight
2.88kg (6.35lbs) approx.
Accessories
Included
20 M3x5 screws, 6 M4.2X18
wood screws
Specifications are subject to change without notice at
