![background image](http://html.mh-extra.com/html/kramer/rc-43t/rc-43t_user-manual_2002036014.webp)
RC-43T - Installing the RC-43T
11
6
Installing the RC-43T
Installing the
RC-43T
consists of the following steps:
Installing the required buttons (see
Section
6.1
)
Connecting the
RC-43T
to the room controller or other auxiliary devices (see
Section
5.1
)
Programming the room controller for the
RC-43T
Note
: Programming is covered by the
K-Config
User Manual
and therefore
not described here.
Installing the
RC-43T
in the wall mounting box (see
Section
6.2
)
6.1
Installing the Front Panel Buttons
The
RC-43T
is supplied with preprinted buttons from which you can choose the six
that best represent the functions you wish to assign the buttons.
To install the front panel buttons
:
1. Remove the front panel (see
Figure 2
and
Figure 3
) by carefully prying it
away from the PC Board frame using a small screwdriver being careful not to
damage it.
2. Remove the stock buttons from the front panel.
3. Remove the six required buttons from the plastic tree.
4. Insert the buttons into the front panel taking care to insure that they are
oriented correctly.
5. Place the PC Board and frame onto the front panel insuring that the
mounting orientation tongue is in line with the cutout on the front panel.
6. Press the front panel and PC Board frame together securely.
Summary of Contents for RC-43T
Page 1: ...KRAMER ELECTRONICS LTD USER MANUAL MODEL RC 43T Remote Controller P N 2900 300301 Rev 2 ...
Page 2: ......
Page 17: ......