![background image](http://html1.mh-extra.com/html/kramer/pip-400/pip-400_user-manual_2001605013.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the PIP-500 Picture in Picture Inserter / Quad Split
10
6 Connecting the PIP-500 Picture in Picture Inserter / Quad Split
To connect your
PIP-500
1
as the example in Figure 3 illustrates, do the
following
2
:
1. On the INPUT 1 set
3
connect
4
:
An s-Video source to the Y/C INPUT 4p connector (for example, an
s-Video player 1)
A component video source to the Y, B-Y, and R-Y INPUT BNC
connectors (for example, a BETACAM video player 1)
2. On the INPUT 2 set
4
connect a composite video source to the CV INPUT
BNC connector (for example, a composite video player 2)
3. On the INPUT 3 set
4
connect a composite video source to the CV INPUT
BNC connector (for example, a composite video player 3)
4. On the INPUT 4 set
4
connect an s-Video source to the Y/C INPUT 4p
connector (for example, an s-Video player 4)
5. On the INPUT 5 set
4
connect a composite video source to the CV INPUT
BNC connector (for example, a composite video player 5)
6. Connect the OUTPUT connectors
5
, as follows:
The CV OUTPUT BNC connector to the composite video acceptor
(for example, a composite video display)
The Y/C OUTPUT 4p connector to the s-Video acceptor (for
example, an s-Video display)
The Y, B-Y, and R-Y OUTPUT BNC connectors to the component
video acceptor (for example, a component video projector)
7. Connect the QUAD OUT
6
connectors, as follows
7
:
The CV QUAD OUT BNC connector to the composite video display
The Y/C QUAD OUT 4p connector to the s-Video display
8. Connect a PC or other controller, if required (see section 6.1).
9. Connect the power cord
8
(not illustrated in Figure 3).
1 From this section on, all the information is relevant to the PIP-400 and PIP-500 machines, unless noted otherwise
2 Switch OFF the power on each device before connecting it to your PIP-500. After connecting your PIP-500, switch ON its
power and then switch on the power on each device
3 PIP-200xl has two sets of inputs, the PIP-300 has three sets of inputs
4 You do not have to connect all the inputs in each set
5 If only one output is required, connect that output to the PIP-500, and leave the other outputs unconnected
6 All four inputs (1 to 4) must be connected to achieve a good quality quad split output
7 You do not have to connect both QUAD outputs
8 We recommend that you use only the power cord that is supplied with this machine