Kramer Electronics Ltd.
PA-120Net, PA-240Net
– Protocol 3000
40
NET-DHCP
Functions
Permission
Transparency
Set:
NET-DHCP
Administrator
Public
Get:
NET-DHCP?
End User
Public
Description
Syntax
Set:
Set DHCP mode
#NET-DHCP
SP
mode
CR
Get:
Get DHCP mode
#NET-DHCP?
CR
Response
~
nn
@NET-DHCP
SP
mode
CR LF
Parameters
mode
–
0
(do not use DHCP. Use the IP address set by the factory or the NET-IP command),
1
(try to use DHCP. If unavailable, use the IP address set by the factory or the NET-IP command)
Notes
Connecting Ethernet to devices with DHCP may take more time in some networks
To connect with a randomly assigned IP by DHCP, specify the device DNS name (if available) using the
command “NAME”. You can also get an assigned IP by direct connection to USB or RS-232 protocol port if
available
For proper settings consult your network administrator
K-Config Example
Enable DHCP mode, if available:
“#NET
-DHCP
1”,0x0D
NET-MAC?
Functions
Permission
Transparency
Set:
–
–
–
Get:
NET-MAC?
End User
Public
Description
Syntax
Set:
–
–
Get:
Get MAC address
#NET-MAC?
CR
Response
~
nn
@NET-MAC
SP
mac_address
CR LF
Parameters
mac_address
– Unique MAC address. Format: XX-XX-XX-XX-XX-XX where X is hex digit
K-Config Example
“#NET
-
MAC?”,0x0D
