Kramer Electronics Ltd.
PA-120Net, PA-240Net
– Using the Embedded Web Pages
16
Selecting Hi-Z Mono Settings
To Select Hi-Z Mono Settings:
1. In the Navigation pane, click
Audio Settings
. The Audio Settings page appears.
Figure 12: Audio Settings Page
2. Set the Hi-Z reduction to mono to one of the following:
▪
Select
Left only
to use left audio in connectors.
▪
Select
Stereo Down Mix
to reduce the stereo input to mono.
Changing Standby Settings
To change standby settings:
1. In the Navigation pane, click
Audio Settings
.
The Audio Settings page appears (see
2. Define the Standby Settings:
▪
Set auto standby to
ON
or
OFF
.
▪
Type the audio threshold to initiate auto standby.
The "threshold" sets what is considered a valid input signal by the amplifier, and
what is considered noise.
This will also influence the front panel LEDs. If the input signal becomes lower
than the threshold, the LEDs will not illuminate.
▪
Set the standby timeout to
5
,
10
or
15
minutes.
