Kramer Electronics Ltd.
PA-120Net, PA-240Net
– Connecting the PA-240Net
10
4. Highlight either
Internet Protocol Version 6 (TCP/IPv6)
or
Internet Protocol Version 4
(TCP/IPv4)
depending on the requirements of your IT system.
5. Click
Properties
.
The Internet Protocol Properties window relevant to your IT system appears as shown in
Figure 7: Internet Protocol Version 4
Properties Window
Figure 8: Internet Protocol Version 6
Properties Window
6. Select
Use the following IP Address
for static IP addressing and fill in the details as
For TCP/IPv4 you can use any IP address in the range 192.168.1.1 to 192.168.1.255
(excluding 192.168.1.39) that is provided by your IT department.
Figure 9: Internet Protocol Properties Window
7. Click
OK
.
8. Click
Close
.