850 - Operating the 850 Pattern Generator
13
13
5.2
Operating the 850 Using the Control Application
The
850
Control Application
is a PC-based program which lets you program and
control the device.
To use the
850
Control Application
you must download and install the USB driver
and the
850
Control Application.
Note
: The USB driver is not supported by Windows 64 bit systems.
5.2.1
Connecting to the Device
To connect to the device:
1. Run the
Control Application
by clicking
Start
>
Programs
>
Kramer
Electronics
>
850
.
2. Click the
Connect
button.
The
Connection Method
window is displayed as shown in
Figure 7
.
Figure 7: Connection Method Window
3. Select the required connection method (via a serial or USB connection) by
clicking the relevant radio button.
4. For a serial connection, select the required Com port from the drop-down
list.
5. For a USB connection, select the required USB device from the drop-down
list.
To view an up-to-date list of available USB ports, press the
Refresh Ports
button.