Kramer K-Able Box, User Manual

Page: 8 / 17

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Mounting the K-Able Box
6
5 Mounting the K-Able Box
This section consists of:
• Mounting the K-Able Box horizontally (See Section 5.1
• Mounting a single K-Able Box vertically (see
)
Section 5.2
• Mounting multiple K-Able Box units vertically (see
)
Section 5.3
5.1 Mounting the K-Able Box Horizontally
)
The K-Able Box can be mounted horizontally to the underneath of a surface
(such as, a table) using the supplied screws.
Figure 2: Mounting the K-Able Box and Cable Exit Bracket Horizontally
To mount the K-Able Box horizontally as illustrated in the example in
Figure 2
:
1. Position the K-Able Box relative to the edge of the table as shown in
Figure 2 and secure it using the four wood screws supplied.
2. Feed the cable through the cable exit bracket.
3. Position the cable exit bracket underneath the table such that the cable
connector will not protrude beyond the edge of the table.
4. Secure the cable exit bracket using the two of the short wood screws
supplied.
5. Slide the plastic friction bush around the cable and press it into the
opening in the cable exit bracket (see Figure 3 ).