Mounting the K-Able Box
11
11
5. Screw the nut onto the bolt only until the end of the bolt is flush with
the nut.
6. Slide the pin at the front of the
K-Able Box
housings into the front of
the multiple-mounting bracket at the same time as hooking the bolt
onto the rear of the vertical-mounting bracket.
7. Tighten the nut on the bolt, securing the
K-Able Box
units to the
vertical-mounting bracket.
8. Feed the cables through the
TBUS WCP
/
WCP-2
/
WCP-21
inserts.
9. Slide the plastic friction bushes around each of the cables and press
them into the openings in the inserts.
Figure 9: Mounting Multiple K-Able Box Units Vertically—Rear View
