KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the Remote Control Transmitters (IR-1 / IR-1-01)
14
7.4.2
Controlling the Scaler LEDs and Buttons of the VP-25xl
The VP-25xl includes independent Scaler control functionality that can be
controlled from the front panel Scaler section of the VP-25xl, as Figure 4
illustrates:
Figure 4: Controlling the VP-25xl Scaler functionality via the IR-1 / IR-1-01
You can also control this independent Scaler control functionality using the
IR-1 and/or IR-1-01 to do the following:
•
Select a Scaler INPUT, see section
7.4.2.1
•
Select a Scaler OUTPUT resolution (but not Bypass), see section
7.4.2.2
•
Select a Process
1
, see section
7.4.2.3
•
Increase the Process level, see section
7.4.2.4
•
Decrease the Process level, see section
7.4.2.5
7.4.2.1
Selecting a Scaler INPUT
To select a Scaler INPUT, do the following:
•
Point the remote control transmitter at the remote receiver and press the
keys 5 and then 1 to cycle between the 3 Input LEDs (CV, Y/C, VGA)
Note: Selecting the VGA INPUT generates an additional VGA/XGA output,
but facilitates neither signal conversion nor resolution adjustment. It fixes the
Scaler OUTPUT resolution at Bypass (see the VP-25xl user manual).
7.4.2.2
Selecting a Scaler OUTPUT resolution (but not Bypass)
To select a Scaler OUTPUT resolution (but not Bypass), do the following:
•
Point the remote control transmitter at the remote receiver and press the
keys 5 and then 2 to cycle between the Output LEDs (with INPUT CV or Y/C)
1 H Phase, Hue, Color, V Pos, Bright and/or Contrast
