Using the Remote Control Transmitters (IR-1 / IR-1-01)
11
7.2 Switching an Input to an Output (IR-1 / IR-1-01)
To switch an input to an output:
•
Using the IR-1, see section
7.2.1
•
Using the IR-1-01, see section
7.2.2
7.2.1
Switching an Input to an Output via the IR-1 (except for Group 20)
To switch an input to an output, using the IR-1, do the following:
1. Point the remote control transmitter at the remote receiver and press the
SHIFT key. The TRANS LED lights.
2. Press the GROUP key. The TRANS LED lights.
3. Press a # key (for the group, according to the specifications in Table 2).
4. Press the UNIT key. The TRANS LED lights.
5. Press a # key (for the unit). The TRANS LED lights.
6. Press a # key (for the output
1
). The TRANS LED lights.
7. Press a # key (for the input). The TRANS LED lights.
7.2.2
Switching an Input to an Output via the IR-1-01
Usually—for products that are allocated to groups other than Group 20—to
switch input 3 to output 7, press <# 7> and then <# 3>. The <0/10> key
represents 10. With Group 20, the <0/10> key represents either 0 (<-->
double digit mode) or 10 <-> single digit mode). After selecting the mode, it
is saved internally and does not need to be selected for future operations,
unless the mode is to be changed.
7.2.2.1
Switching an Input to an Output in the <-> Single Digit Mode
For example, to switch input 15 to output 5 on series 16x16 matrix switcher
that is allocated to Group 20, using the IR-1-01, do the following:
1. <SHIFT> <-> to choose the <-> single digit mode (unless already selected).
2. 5,
15.
7.2.2.2
Switching an Input to an Output in the <--> Double Digit Mode
For example, to switch, input 4 to output 62 on series 16x16 matrix switcher
that is allocated to Group 20, using the IR-1-01, do the following:
1 When switching units categorized in groups 1, 2, 3, 4, 14, 15 and 16, ignore step 7 which is inapplicable to units with just
one output
