Connecting the FC-31xl UXGA to DVI Converter
7
5
Connecting the FC-31xl UXGA to DVI Converter
To connect your
FC-31xl
UXGA to DVI Converter
, as the example in
1. Connect a computer graphics source (for example, a computer) to the
UXGA IN connector.
2. Connect the DVI OUT connector to a DVI projector.
3. Connect the 12V DC power adapter (wall transformer) to the 12V DC
socket and connect the transformer to the mains electricity (not shown
in
).
Figure 3: Connecting the FC-31xl UXGA to DVI Converter
6
EDID
The
FC-31xl
is shipped with a fixed, factory default EDID (see
Section 8
).
1 Switch off the power on each device before connecting it to your FC-31xl. After powering up your FC-31xl, switch on the
power on each device